Go Back to:
Home >
Mailing & Paper Handling Equipment Catalog
>
Address, Envelope, Postcard Printers
>
legacy model
shown with optional EASYFeed 120 Feeder
The RENA Systems Envelope Imager XT 3.0 handles the most demanding mailing challenges time and time again. Time is of the essence, and with production speeds of over 34,000 postcards/hr. and 26,000 #10 envelopes/hr., the XT 3.0 gives you superior, reliable output.
It’s versatile printing, too. A large 3” print area and three independent print modules give you the options for putting addresses, attention lines, postal barcodes, return addresses and indicia on mail pieces at the same time. The XT 3.0 accepts materials up to 3/8"thick.
Take advantage of an inkjet cartridge storage compartment to extend the life of your cartridges and increase their yield. The Five-Channel AccuTrak Transport – a wide center belt with a powerful vacuum assist – keeps pieces in place through transport. The outer transport belts can be customized to the size of the mail piece.
This is a full-featured, high volume, large capacity piece of equipment. The Rena Systems Envelope Imager XT 3.0 takes on any challenge with reliable and outstanding results.
Key FeaturesMSRP
Rena Envelope Imager XT 3.0 - does not include feeder: $17,430.00
Rena Envelope Imager XT 3.0 S - with Rena EASYFeed 120 Feeder: $20,795.00
Technical Specifications
| PRINT TECHNOLOGY |
Thermal Inkjet, Six HP 45A-Style High Capacity Cartridges |
|||
| ADDRESS SPEED | 34,000
/hour at 150 dpi 25,000 /hour at 200 dpi 20,000 /hour at 300 dpi 11,000 /hour at 600 dpi (9 lines on 4" x 6" Postcard) |
26,000
/hour at 150 dpi 19,000 /hour at 200 dpi 15,000 /hour at 300 dpi 7,200 /hour at 600 dpi (9 lines on #10 Envelopes) |
||
|
PRINT QUALITY (Dots Per Inch) |
Description |
Dots Per Inch | Resolution | |
| High Quality | 600 dpi | 600 x 600 dpi | ||
| Letter Quality | 300 dpi | 600 x 300 dpi | ||
| Standard Quality | 200 dpi | 600 x 200 dpi | ||
| Draft Quality | 150 dpi | 600 x 150 dpi | ||
| IMAGE AREA |
3” X 17” w/ 13” vertical range |
|||
| PRINT HEAD SPLIT |
3 Pen Stitched + 2 Pen Stitched + 1 Pen Design |
|||
| PROCESSOR |
AMD TigerSharc 100 MHz DSP with Dual Calculation Technology |
|||
| PRINT ORIENTATION |
Normal and Reverse |
|||
| FONTS |
All TrueType fonts available on PC |
|||
| INK MONITOR |
Visible on Display |
|||
| GRAPHICS, LOGOS, AND BARCODES |
Allows printing of graphics, logos, and barcodes |
|||
| MATERIAL SIZE | Length – 5” to 17” Width – 3” to 13.5" | |||
| MATERIAL THICKNESS |
Up to 3/8” |
|||
| FEEDER | In-line design works with various input devices | |||
| FEEDER INTERFACE |
Start-Stop Control |
|||
| TRANSPORT TYPE | Five Channel AccuTrak Vacuum Transport with Repositionable Outer Belts/Side Guides | |||
| VACUUM TYPE |
Through-the-Belt Triple Pancake Fans with On/Off Control |
|||
| SOFTWARE |
Windows Printer Drivers for Windows 98, 2000, NT, ME, and XP |
|||
| PC INTERFACE |
Centronics Parallel and USB 2.0 |
|||
| DIAGNOSTICS | Resident in firmware | |||
| FIRMWARE UPDATE | Flash PROM update | |||
| DUTY CYCLE | 120 million addresses total or 2,000,000 per month over a 5-year life cycle. | |||
| DIMENSIONS |
11.5” H x 30” L x 23” W (292 mm H x 762 mm L x 584 mm W) |
|||
| WEIGHT |
90 lbs. (40.9 kg) |
|||
| ELECTRICAL |
115VAC or 240VAC 50/60 Hz |
|||
| OPTIONS |
EASYFeed Feeders, T-750/T-950 In-line Tabbers, XPS-ProFeed Feeders, Conveyor/Stacker/Dryer, Right-2-Left Configuration |
|||
| COUNTERS | One operator resettable job counter, one permanent lifetime counter | |||
| MEMORY | 64MB | |||
Additional Information
Rena Envelope Imager XT 3.0 Brochure